Product Details
Supreme Suspensions – 4pc Set of 2 Wheel Adapters for 2000-2010 Chevy Silverado 2500HD | 8×165.1 to 8×170 mm Bolt Pattern …
Free Shipping+Easy returns
Product Details
AJP Distributors Performance Racing Upgrade JDM 6 Hole Bolt Pattern Aftermarket Steering Wheel Adapter Hub Removable Relea…
Free Shipping+Easy returns
Product Details
Customadeonly 2 Pieces 0.47" 12mm Approx. 1/2" Hub Centric Wheel Spacers Bolt Pattern 6×135 Center Bore 87.1mm Thread Pitc…
Free Shipping+Easy returns
Product Details
Customadeonly 2 Pieces 1/8" 3mm Hub Centric Wheel Spacers Bolt Pattern 5×108 Center Bore 63.4mm Fits Jaguar Ford
Free Shipping+Easy returns
Product Details
dynofit 5×100 to 5×4.5 (5×114.3) Wheel Adapters for Wheels Change, 5×4.5 Rims on 5x100mm Vehicles (1" M12x1.5 64.1mm) Forg…
Free Shipping+Easy returns
Product Details
Supreme Suspensions – 4pc Kit for 2005-2021 Ford F250 Super Duty 1.5" Wheel Adapters / M14x1.5 Studs / 8x170mm to 8×165.1m…
Free Shipping+Easy returns
Product Details
Evan-Fischer Wheel Hub Compatible with 2001-2005 Lexus IS300 Front Left or Right RWD 5 x 4.5 in. Bolt Pattern
Free Shipping+Easy returns
Product Details
4PCS 1.25" Wheel Adapters Converter 5×4.5 to 5×5 for JK JKU WK WJ XK Wheels on XJ KJ ZJ KK TJ YJ Vehicle, 5x127mm Wheel on…
Free Shipping+Easy returns
Product Details
Customadeonly 2 Pieces 1" 25mm Hub Centric Wheel Spacers Bolt Pattern 6×5.5 6×139.7 for 6 Lug 1984-2002 2005-2008 4Runner …
Free Shipping+Easy returns
Product Details
MAYASAF [2" THICK, 4 PACK, 6 LUGS] Wheel Spacers for Chevy(GMC) 1500/C2500/K2500, Tahoe/Astro/Yukon(XL)/Avalanche, Cadilla…
Free Shipping+Easy returns
Product Details
Customadeonly 2 Pieces 3/16" 5mm Hub Centric Wheel Spacers Adapters Bolt Pattern 5×115 Thread Pitch 14×1.5 Center Bore 71….
Free Shipping+Easy returns
Product Details
4 Pc 2" Thick Wheel Spacers Adapters 8×200 MM Bolt Pattern Front + Rear Bolt On Kit | Compatible with 2005-2017 Ford F-350…
Free Shipping+Easy returns
Jeep Vehicles with 5×5.5 Bolt Pattern Cragar Series 310 White Nomad I Wheel
The CRAGAR Company was founded in 1930 by Crane Gartz and Harlan Fengler who originally made automotive cylinder heads. After propelling itself into prominence in the 1960’s, the CRAGAR brand has retained a prominent position in the custom wheel industry. Today, tens of millions of vehicles are equipped with quality CRAGAR wheels. From street rods to dragsters, pickups to off-road vehicles, CRAGAR is synonymous with speed, performance, good times and adventure. If you’re in the market for Quality steel wheels for your CJ or Wrangler, CRAGAR has all the latest styles! All CRAGAR Wheels are manufactured in the USA to exacting standards.
MST Time Attack Wheels (15×8 4×100 / 4×114.3) +0 Offset – Cosmic Purple
Sold Individually Limited Lifetime Structural Warranty 1 Year Warranty on Paint Finish Fits 4×100 and 4×114.3 bolt patterns +0 offset 15×8\
H\u0026R Wheel Spacers Toyota Celica (4/100 Bolt Pattern) (1986-2005) 5mm 10mm 15mm 20mm 25mm – DRS 20mm
Fitment Information Toyota Celica (1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005) Specs \u0026 Features Bolt Pattern: 4/100 Center Bore: 54.1 Bolt or Stud: Stud Thread Type: 12×1.5 Sold as a pair DRS Series DRS Series® spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included.) DRM Series DRM Series® spacers bolt to the hub with existing wheel studs and special nuts (included.) Wheel is bolted to new DRM wheel studs. Product Description Wider is Better! H\u0026R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender‚ instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE!TRAK+ Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H\u0026R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H\u0026R TRAK+ Wheel Spacers are hubcentric and feature a full contact hub‚ just like the factory hub‚ for even load force distribution and lateral support. Additional Note These are hub-centric flat disc type space
rs which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation. If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer. Careful attention must be paid to the vehicle hub height and inner wheel bevel measurements. Failure to follow the measurement guidelines below can result in serious damage to wheel spacers, wheels, and mounting hardware.
Jeep Vehicles with 5×4.5 Bolt Pattern Cragar Series 342 Black \
The CRAGAR Company was founded in 1930 by Crane Gartz and Harlan Fengler who originally made automotive cylinder heads. After propelling itself into prominence in the 1960’s, the CRAGAR brand has retained a prominent position in the custom wheel industry. Today, tens of millions of vehicles are equipped with quality CRAGAR wheels. From street rods to dragsters, pickups to off-road vehicles, CRAGAR is synonymous with speed, performance, good times and adventure. If you’re in the market for Quality steel wheels for your CJ or Wrangler, CRAGAR has all the latest styles! All CRAGAR Wheels are manufactured in the USA to exacting standards.
American Racing AR927 BARRAGE 20X9 35 5X114.3/5X4.5 Satin Black – 20×9 / 5×4.5 / 35
American Racing AR927 BARRAGE 20X9 35 5X114.3/5X4.5 Satin Black Part#: AR92729012735 Brand: American Racing Model: AR927 BARRAGE Size: 20X9 Bolt Pattern: 5X114.3/5X4.5 OffSet: 35 Hub Bore: 72.6 Backspacing: 6.38 Number Holes: 5 Finish: S-BLK Finish Description: Satin Black CAP PART#: 6220K74-SB Load Rating: 1280
Chevrolet Wheel Center Cap w/ Raised Red Chevy Bow Tie Logo PA6 10180836
Item specifics Condition: Used Seller Notes: “Cap ONLY! Part#10180836 in photo in used condition. This item is in below average condition, still a usable part but needs some care and love to make it look good again. May need to be refinished or exhibits long term wear and tear. Cap is usually on this wheel design.” Modified Item: No Custom Bundle: No Finish: Metal Manufacturer Part Number: 10180836 Placement on Vehicle: Left, Right, Front, Rear Brand: Chevrolet Manufacturer Warranty: No Warranty UPC: Does Not Apply
H\u0026R Wheel Spacers Lincoln Mark LT (2005-2008) 30mm 40mm 50mm – DRM 50mm
Fitment Information Lincoln Mark LT 2WD / 4WD ( 2005, 2006, 2007, 2008) Specs \u0026 Features Bolt Pattern: 6/135 Center Bore: 87.1 Bolt or Stud: Stud Thread Type: 14×2.0 Sold as a pair DRM Series DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included.) Wheel is bolted to new DRM wheel studs. Product Description Wider is Better! H\u0026R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender- instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE!TRAK+ Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H\u0026R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H\u0026R TRAK+ Wheel Spacers are hubcentric and feature a full contact hub- just like the factory hub- for even load force distribution and lateral support.
